Release Notes¶
This page aims to act as a guide for migrating between major SQLFluff releases. Necessarily this means that bugfix releases, or releases requiring no change for the user are not mentioned. For full details of each individual release, see the detailed changelog.
Upgrading from 1.x to 2.0¶
Upgrading to 2.0 brings several important breaking changes:
All bundled rules have been recoded, both from generic
L00X
formats into groups within similar codes (e.g. an aliasing group with codes of the formatAL0X
), but also given names to allow much clearer referencing (e.g.aliasing.column
).Rule Configuration now uses the rule name rather than the rule code to specify the section. Any unrecognised references in config files (whether they are references which do match existing rules by code or alias, or whether the match no rules at all) will raise warnings at runtime.
A complete re-write of layout and whitespace handling rules (see Let’s talk about whitespace), and with that a change in how layout is configured (see Configuring Layout) and the combination of some rules that were previously separate. One example of this is that the legacy rules
L001
,L005
,L006
,L008
,L023
,L024
,L039
,L048
&L071
have been combined simply intoLT01
.
Recommended upgrade steps¶
To upgrade smoothly between versions, we recommend the following sequence:
The upgrade path will be simpler if you have a slimmer configuration file. Before upgrading, consider removing any sections from your configuration file (often
.sqlfluff
, see Configuration) which match the current Default Configuration. There is no need to respecify defaults in your local config if they are not different to the stock config.In a local (or other non-production) environment, upgrade to SQLFluff 2.0.x. We recommend using a compatible release specifier such as
~=2.0.0
, to ensure any minor bugfix releases are automatically included.Examine your configuration file (as mentioned above), and evaluate how rules are currently specified. We recommend primarily using either
rules
orexclude_rules
rather than both, as detailed in Enabling and Disabling Rules. Using either thesqlfluff rules
CLI command or the online Rules Reference, replace all references to legacy rule codes (i.e. codes of the formL0XX
). Specifically:In the
rules
andexclude_rules
config values. Here, consider using group specifiers or names to make your config simpler to read and understand (e.g.capitalisation
, is much more understandable thanCP01,CP02,CP03,CP04,CP05
, but the two specifiers will have the same effect). Note that while legacy codes will still be understood here (because they remain valid as aliases for those rules) - you may find that some rules no longer exist in isolation and so these references may be misleading. e.g.L005
is now an alias forlayout.spacing
but that rule is much more broad ranging than the original scope ofL005
, which was only spacing around commas.In Rule Configuration. In particular here, legacy references to rule codes are no longer valid, will raise warnings, and until resolved, the configuration in those sections will be ignored. The new section references should include the rule name (e.g.
[sqlfluff:rules:capitalisation.keywords]
rather than[sqlfluff:rules:L010]
). This switch is designed to make configuration files more readable, but we cannot support backward compatibility here without also having to resolve the potential ambiguity of the scenario where both code-based and name-based are both used.Review the Configuring Layout documentation, and check whether any indentation or layout configuration should be revised.
Check your project for In-File Configuration Directives which refer to rule codes. Alter these in the same manner as described above for configuration files.
Test linting your project for unexpected linting issues. Where found, consider whether to use
sqlfluff fix
to repair them in bulk, or (if you disagree with the changes) consider changing which rules you enable or their configuration accordingly. In particular you may notice:The indentation rule (
L003
as was, nowLT02
) has had a significant rewrite, and while much more flexible and accurate, it is also more specific. Note that Hanging Indents are no longer supported, and that while not enabled by default, many users may find the enabling Implicit Indents fits their organisation’s style better.The spacing rule (
LT01
:layout.spacing
) has a much wider scope, and so may pick up spacing issues that were not previously enforced. If you disagree with any of these, you can override thesqlfluff:layout
sections of the config with different (or just more liberal settings, likeany
).
Example 2.0 config¶
To illustrate the points above, this is an illustrative example config for a 2.0 compatible project. Note that the config is fairly brief and sets only the values which differ from the default config.
[sqlfluff]
dialect = snowflake
templater = dbt
max_line_length = 120
# Exclude some specific rules based on a mixture of codes and names
exclude_rules = RF02, RF03, RF04, ST06, ST07, AM05, AM06, convention.left_join, layout.select_targets
[sqlfluff:indentation]
# Enabling implicit indents for this project.
# See https://docs.sqlfluff.com/en/stable/layout.html#configuring-indent-locations
allow_implicit_indents = True
# Add a few specific rule configurations, referenced by the rule names
# and not by the rule codes.
[sqlfluff:rules:capitalisation.keywords]
capitalisation_policy = lower
[sqlfluff:rules:capitalisation.identifiers]
capitalisation_policy = lower
[sqlfluff:rules:capitalisation.functions]
extended_capitalisation_policy = lower
# An example of setting a custom layout specification which
# is more lenient than default config.
[sqlfluff:layout:type:set_operator]
line_position = alone
Upgrading to 1.4¶
This release brings several internal changes, and acts as a prelude to 2.0.0. In particular, the following config values have changed:
sqlfluff:rules:L007:operator_new_lines`
has been changed tosqlfluff:layout:type:binary_operator:line_position
.sqlfluff:rules:comma_style`
andsqlfluff:rules:L019:comma_style
have both been consolidated intosqlfluff:layout:type:comma:line_position
.
If any of these values have been set in your config, they will be automatically translated to the new values at runtime, and a warning will be shown. To silence the warning, update your config file to the new values. For more details on configuring layout see Configuring Layout.
Upgrading to 1.3¶
This release brings several potentially breaking changes to the underlying parse tree. For users of the cli tool in a linting context you should notice no change. If however your application relies on the structure of the SQLFluff parse tree or the naming of certain elements within the yaml format, then this may not be a drop-in replacement. Specifically:
The addition of a new
end_of_file`
meta segment at the end of the parse structure.The addition of a
template_loop`
meta segment to signify a jump backward in the source file within a loop structure (e.g. a jinjafor`
loop).Much more specific types on some raw segments, in particular
identifier
andliteral
type segments will now appear in the parse tree with their more specific type (which used to be calledname
) e.g.naked_identifier
,quoted_identifier
,numeric_literal
etc…
If using the python api, the parent type (such as identifier
)
will still register if you call .is_type("identifier")
, as this
function checks all inherited types. However the eventual type returned
by .get_type()`
will now be (in most cases) what used to be
accessible at .name
. The name
attribute will be deprecated
in a future release.
Upgrading to 1.2¶
This release introduces the capability to automatically skip large files, and sets default limits on the maximum file size before a file is skipped. Users should see a performance gain, but may experience warnings associated with these skipped files.
Upgrades pre 1.0¶
0.13.x new rule for quoted literals, option to remove hanging indents in rule L003, and introduction of
ignore_words_regex
.0.12.x dialect is now mandatory, the
spark3
dialect was renamed tosparksql
and datatype capitalisation was extracted from L010 to it’s own rule L063.0.11.x rule L030 changed to use
extended_capitalisation_policy
.0.10.x removed support for older dbt versions < 0.20 and stopped
fix
attempting to fix unparsable SQL.0.9.x refinement of the Simple API, dbt 1.0.0 compatibility, and the official SQLFluff Docker image.
0.8.x an improvement to the performance of the parser, a rebuild of the Jinja Templater, and a progress bar for the CLI.
0.7.x extracted the dbt templater to a separate plugin and removed the
exasol_fs
dialect (now merged in with the mainexasol
).0.6.x introduced parallel processing, which necessitated a big re-write of several innards.
0.5.x introduced some breaking changes to the API.
0.4.x dropped python 3.5, added the dbt templater, source mapping and also introduced the python API.
0.3.x drops support for python 2.7 and 3.4, and also reworks the handling of indentation linting in a potentially not backward compatible way.
0.2.x added templating support and a big restructure of rules and changed how users might interact with SQLFluff on templated code.
0.1.x involved a major re-write of the parser, completely changing the behaviour of the tool with respect to complex parsing.